QGIS is the central piece of the Boundless Desktop package installation. The well known leading Open Source GIS for desktop, QGIS, is a cross-platform desktop application for viewing, editing, and analysing geospatial data from a variety of (proprietary and open) vector, raster, and database formats.
QGIS’s development is steered by the QGIS Project, which works with hundreds of volunteers and companies (including Boundless) from all over the world, that helps enhance and maintain QGIS.
For convenience, outside the supported scope of Boundless Desktop, the following processing providers are available for QGIS’s Processing framework:
Quick start guide¶
This section aims to give you a brief overview about QGIS. We will mainly focus on QGIS’s graphical user interface (GUI) and some of the most common operations like loading data, managing layers and printing a map. For more detailed information on QGIS usage see the tutorials on our learning centre and/or consult QGIS’s official documentation.
QGIS user interface¶
Use any of the available QGIS’s shortcuts on your computer to open QGIS.
When running QGIS for the first time after Boundless Desktop installation, the Boundless Connect plugin’s First Run Wizard will be triggered. We will not cover that process in this page, so please see the Connect plugin’s documentation for instructions on how to proceed or you can just cancel it (you can resume it later).
By default, the QGIS GUI should resemble the one presented in the next figure.
As a very basic overview of the default GUI we have:
- On the top of the screen you will find the menu bar (1). The menu bar provides access to various QGIS features using a standard hierarchical menu.
- Below it, you will find the main toolbar area (2). Toolbars allow access to most of the same functions as the menus, plus additional tools for interacting with the map. Hold your mouse over the item for a short description of the tool’s purpose. Toolbars can be moved by dragging and dropping them elsewhere and even hidden using .
- Another toolbar can be found at the left side of the screen (3). By default, the Manage Layers Toolbar is placed there. This toolbar can be used to load and create data, as we will see later.
- Next to it, there are two Panels by default: The Browser Panel (4), which is used to browse and load data, and the Layers Panel (5) which is used to toggle layers visibility, setting their relative order, accessing the layer’s properties and much more. Panels can also be moved by drag and drop, or even hidden using View –> Panels.
- To the right and middle of the screen, you find the map canvas (6) where all visible layers’ geometries will be displayed.
- At the bottom of the screen you will find the status bar (7) with several useful information and controls for the current map scale, the mouse pointer coordinates, the current Coordinate Reference System’s EPSG code in use, and more.
In QGIS, to load data, you can either use the Browser Panel, the Manage Layers Panel or even use your operating system file explorer.
Using the Browser Panel, browse to the sample data location, more precisely into the
Natural_Earth_quick_start\10m_physicalfolder. Double-click the folder’s names or click the plus signs next to it to view its contents. Find the
ne_10m_coastline.shpshapefile and drag and drop it from the browser to the map canvas. It will load the vector layer.
The layer should now be visible on the map canvas, using a random style. It should also be visible in the Layers Panel list.
Let’s open another file, this time using the Manage Layers toolbar buttons. Notice that there is one button for each type of dataset, so we should select the most suitable one. Click on the Add Raster Layer. Then, navigate ito the forlder
Natural_Earth_quick_start\50m_raster\NE1_50M_SR_W, select the
NE1_50M_SR_W.tiffile and click Open.
Finally, let’s open an ESRI fileGeodatabase, just because it has a small catch. In the guilabel:Manage Layers toolbar click the Add Vector Layer. In the next dialog, under Source type check the
Directoryoption. Then, making sure that Type is set to
ESRI FileGDB, use the Browse button to navigate and select the
Natural_Earth_quick_start\10m_cultural\ne_10m_admin_1_states_provinces_geodb.gdbfolder. Click choose. Finally, back in the dialog window, click Open to load the layer.
Feel free to add any other data, but bare in mind that you can load several files at once by holding the
Ctrlkey during file selection in any of the two described methods. Also, you can drag and drop files from your operating system’s file manager (Windows Explorer in Windows or Finder in Mac OS X) into QGIS Map canvas to load them.
We have been using the Layers Panel already, but let’s have a deeper look into it’s potential.
Select a layer by clicking on its name on the layers list/legend. The layer will become the active layer, meaning that many layer specific tools and actions will apply to that layer in particular. For example, select the
ne_10_coastlinelayer and, in the Map Navigation Toolbar, click the Zoom to Layer button. This will zoom the map canvas to the full extent of a particular layer.
You can change the order of the layers (and consequently their rendering order) by dragging them up and down in the Layers. Do this making sure to put the raster layer at the bottom, the polygons layer above it, and the line layer at the top.
You can change the visibility status of the layers by (un)checking the small checkbox next to its name. Give it a try and see the result in the map canvas. (Make sure to keep all layers visible in the end)
By double-clicking the layer name in the Layers Panel, or right-clicking and selecting properties, you will open the layer’s properties. Double-click the
ne_10m_admin_1_states_provinceslayer, navigate to the Style tab. There you can change how the layer will be displayed in the map. Click the Simple fill in the symbols layers list, and in the Fill Fill type select
No brush. Press Ok to apply the changes and close the properties dialog.
At this time you might want to save your project.
Go to Save.or hit Ctrl+S. Choose the destination folder where your project will be saved, type in a sugestive name and click
Exploring data’s attributes¶
To make proper use of the dataset, one should know its attributes. Let’s see how to retrieve the attributes of our layers.
Make sure the
ne_10m_admin_1_states_provinceslayer is still active and in the Attributes toolbar (if not visible, go to ), select the Identify tool. Then, click the map over one of the geometries of the layer. The Identify Results Panel will show up, where you can see the feature’s fields and respective values. (You may need to expand the panel a bit to see it all).
Seeing layer’s attributes using the identify tool in a feature
You can also see all attributes of your layer in its attributes table. Having the
ne_10m_admin_1_states_provinceslayer selected, click the Open Attributes table in the Attributes toolbar (or right-click the layer’s name in the Layers Panel and choose Open Attribute Table ). The layer’s attribute table will show up.
In the attribute table, use the mouse wheel to quickly scroll up and down the attributes, or the scroll bar to move horizontally.
Select one feature by clicking its id number at the left side of the feature’s row of attributes. Then, use the Zoom to Selected Rows tool at the top of the attribute table to zoom the map to that particular layer.
Repeat step 4 selecting several rows by holding the
Ctrlkey while clicking the id numbers. In the end, make sure to deselect all features using the Deselect All button in the attribute table.
Add simple labels¶
Now that we already know our data attributes, let’s use one as a label for our geometries.
Go back to the
ne_10m_admin_1_states_provincesproperties menu by double-clicking its name in the Layers panel. Go to the Labels tab, and select
Show labels for this layer. Then, in the Label with combobox select the
abbrevfield. Press Ok to apply the changes, close the properties dialog and see how it looks.
Print a simple map¶
Now let’s see how to print a very simple map with the layers that we have loaded. In QGIS, you can have as many map layouts (a.k.a. print compositions) as you like, and you can manage them in the Print Composer Manager.
Once you are satisfied with the map’s looks, click the New Print Composer button in the File toolbar, type a representative name for the composer and click Ok.
The print composer will open with an empty page. To add a map item, click the Add Map in the Toolbox toolbar and draw a rectangle covering most of the page by clicking and dragging over it. The map content should appear.
You can adjust the map item position and size by clicking and dragging the corner and side handles.
You can also adjust the map extent using the Move item content tool. While this tool is selected, you can pan the map content clicking and dragging inside of it, and change its scale using the mouse wheel. More precise controls to set the map item position, size, scale and extent can be found in the Item properties tab/panel.
Now that we are satisfied with our very minimalist map, let’s export it. In the Composer toolbar, click Export to PDF. Choose a location and name for your PDF file and click Ok.
Obviously, we could do more complex maps by adding other items like legends, labels and images. Please see our learning centre to learn how to work with them. Also, if you have interessed, have a look into this QGIS Map Gallery.
Alongside with QGIS you will find QGIS Browser, another QGIS standalone application in the Boundless Desktop folder. QGIS Browser can be used to browse the datasets quickly on your local computer, network or remote services. You can see its metadata, preview its geometries and see the attribute table.